Gear Cutting and Keyseaters
Gear / Shapers / Spline
| Machine Number | Make | Qty | Type | Maximum Diameter | Pitch Range | Maximum Stroke |
|---|---|---|---|---|---|---|
| 473 | 6" Fellows Shaper | 1 | Straight / Helical | 35" | 3 to any | 6" |
| 479 | 8" Fellow Shaper | 1 | Straight / Helical | 35" | 3 to any | 8" |
| 474 | Gleason Gear Generator | 1 | Straight | 35" | 1 1/4" to any | 6" |
| 475 | Gleason Gear Generator | 1 | Straight | 35" | 1 1/4" to any | 6" |
| 402 | Oerlikon K4A | 1 | Bevel | 62" | Any | 12" |
| 403 | Maag 100 | 1 | Straight & Helical | 38" | .5 to any | 19" |
| 452 | Fellows | 1 | Straight | 52" | 2.5 to any | 6" |
| 462 | Fellows Z | 1 | Straight | 18" | 4 to any | 5" |
| 407 | Newton | 1 | Straight | 160" | Any | 38" |
Gear / Spline / Hobbers
| Machine Number | Make | Qty | Maximum Diameter | Max. Length of Cut | Pitch Range | Comments |
|---|---|---|---|---|---|---|
| 406 | Fitchburg | 1 | 42" | 92" | 1 1/4 to any | 280" Max Length |
| 451 | Barber Coleman | 1 | 16" | 46" | 3 to any | 12" at chuck, 76" between centers |
| 450 | Barber Coleman T Type | 1 | 16" | 36" | 3 to any | Taper splines |
| 453 | Barber Coleman 16 - 56 | 1 | 16" | 54" - 59" | 4 to 16 |
Gear Hobbers
| Machine Number | Make | Qty | Maximum Diameter | Face Width | Pitch Range | Comments |
|---|---|---|---|---|---|---|
| 401 | Modul | 1 | 90" | 32" | 1 1/4 to any | |
| 404 | Pfauter | 1 | 42" | 20" | 1 1/4 to any | |
| 405 | G & E | 1 | 28" | 33" | 1 1/2 to any | |
| 471 | G & E Vertical Hobb | 1 | 55" | 24" | 1.75 | Bevel |
| 472 | G & E Vertical Hobb | 1 | 55" | 24" | 1.75 | Bevel |
Gear Checking
| Machine Number | Name | Qty | Comments |
|---|---|---|---|
| 477 | Gleason Hypoid Tester | 1 | 36" to 90 degrees |
| 478 | MTW Worm Gear Checker | 1 | Max 30" worm gears and 8" worms |
Keyseaters
| Machine Number | Name | Qty | Stroke | Key Range |
|---|---|---|---|---|
| 456 | Davis | 1 | 12" | 1/16" to 7/8" |